The BISSELL PowerForce PowerBrush Pet carpet cleaner is an essential tool for pet owners looking to maintain clean and fresh carpets. Designed to tackle pet messes, odors, and stains, this machine helps keep your home environment healthy and pleasant. This guide provides a comprehensive walkthrough on how to assemble and effectively use your BISSELL PowerForce PowerBrush Pet, ensuring you get the best results for a truly clean carpet.
Getting Started: Assembly and Preparation
Before you begin cleaning, proper assembly and preparation are key. Let’s break down the initial steps to get your BISSELL PowerForce PowerBrush Pet ready for action.
Unboxing and Assembling Your Bissell PowerBrush Pet
Upon unboxing your new carpet cleaner, you’ll find several components. Assembly is straightforward and tool-free:
- Handle Assembly: Begin by sliding the middle handle section onto the lower body of the machine. You should hear a click, indicating it’s securely in place.
- Upper Handle Attachment: Next, take the upper handle and slide it into the middle handle section. Again, listen for the click to confirm it’s properly attached.
- Clean Water Tank Placement: Finally, position the clean water tank onto the machine. Press down firmly until it clicks into place, ensuring a secure fit.
Filling the Clean Water Tank Correctly
The clean water tank is where you’ll add water and cleaning formula. Follow these steps to fill it properly:
- Remove the Tank: Detach the clean water tank from the machine by lifting it up by its handle.
- Unscrew the Cap: Locate and unscrew the cap of the clean water tank to access the filling area.
- Fill with Warm Water: Fill the tank with warm tap water up to the indicated water line. It’s crucial to avoid using boiling water as it can damage the tank and the machine. Never heat the tank or water in a microwave, and do not place the tank in a dishwasher.
Choosing the Right Bissell Formula for Pet Stains
For optimal pet stain and odor removal, using the correct BISSELL formula is essential.
- Add BISSELL Formula: Pour BISSELL cleaning formula into the clean water tank, filling to the formula line. Always use BISSELL formulas designed for carpet cleaners to prevent damage and maintain your machine’s warranty. Other formulas may not be compatible and could harm your cleaner.
- Secure the Tank: Replace the cap on the clean water tank and tighten it. Then, reattach the tank to the machine, pressing down until it clicks securely.
Step-by-Step Guide to Cleaning Your Carpets
With your BISSELL PowerForce PowerBrush Pet assembled and ready, you can now start cleaning your carpets. Follow these steps for effective cleaning:
Pre-Cleaning Preparation: What to Do Before You Start
Before you begin deep cleaning, it’s helpful to prepare your carpet area:
- Vacuum: Thoroughly vacuum the carpet to remove loose dirt, debris, and pet hair. This step is crucial for preventing surface dirt from being pushed deeper into the carpet fibers during wet cleaning.
- Move Furniture: Clear the area of any furniture or obstacles to ensure you have full access to the carpet you intend to clean.
The Wet Cleaning Pass: Applying Solution
Now, let’s start the cleaning process:
- Power On: Plug in your BISSELL PowerForce PowerBrush Pet to a power outlet and turn the machine on using the power switch.
- Recline the Machine: Gently step on the recline pedal located near the power switch while pulling back on the handle. This will recline the machine and engage the brush roll for cleaning.
- Wet Pass: Holding down the spray trigger, make a slow, forward, and backward pass over the carpet area you want to clean. This applies the water and formula mixture, penetrating the carpet fibers and loosening dirt and stains.
The Dry Pass: Extracting Water and Dirt
After the wet pass, it’s important to extract the dirty water and speed up drying:
- Dry Pass: Release the spray trigger and make another forward and backward pass over the same area. This time, the machine will suction up the water and dirt without applying more solution.
Repeat and Assess: Achieving Clean Carpets
- Repeat as Necessary: Continue making wet and dry passes until the water being extracted looks clean. This indicates that most of the dirt and cleaning solution has been removed.
- Observe Results: Check the cleaned area for stain removal and overall cleanliness. You may need to repeat the process in heavily soiled areas.
Tips for Optimal Cleaning and Maintenance
To maximize the effectiveness and lifespan of your BISSELL PowerForce PowerBrush Pet, consider these tips:
Speeding Up Drying Time
- Extra Dry Passes: For faster drying, make additional dry passes over the cleaned area. The more dry passes, the more water is extracted, reducing drying time.
- Ventilation: Ensure good ventilation in the room by opening windows or using fans to circulate air.
Regular Maintenance for Longevity
- Empty Dirty Water Tank: Always empty the dirty water tank after each use to prevent odors and bacteria buildup.
- Rinse and Clean Parts: Periodically rinse the clean and dirty water tanks, as well as the nozzle, to keep your machine clean and functioning efficiently.
- Brush Roll Cleaning: Check and clean the brush roll regularly to remove hair and debris that can hinder performance.
By following these instructions, you can effectively use your BISSELL PowerForce PowerBrush Pet to keep your carpets clean, fresh, and free of pet-related messes. Enjoy a cleaner home environment thanks to this powerful carpet cleaning tool!
