Experiencing no spray or weak spray from your Bissell Turboclean Powerbrush Pet carpet cleaner can be frustrating. This guide provides simple steps to help you resolve this common issue and get your machine working correctly again. These instructions are specifically for Bissell TurboClean PowerBrush Pet models 2806, 2910, and 2987.
Before you begin troubleshooting, ensure you are pressing the trigger while performing wet cleaning passes. The spray function is activated by the trigger.
Step 1: Handle Disassembly – Upper Handle Removal
First, we’ll start by disassembling the handle to check for any blockages or misalignments.
- Power Off and Unplug: Turn off your Bissell TurboClean PowerBrush Pet and unplug it from the power outlet for safety.
- Remove the Clean Water Tank: Locate the clean water tank at the top of the machine. Lift the handle of the tank upwards to detach it and set it aside.
- Unwind and Remove Power Cord: Turn the upper cord wrap to release the power cord. Unwind the cord and remove it from the wrap, setting it aside.
- Detach the Upper Handle: Locate the black release button situated below the upper power cord wrap. Press and hold this button while simultaneously pulling the upper handle straight up to remove it.
Step 2: Handle Disassembly – Middle Handle Removal and Reinstallation
Next, we will remove and then reinstall the middle handle to ensure proper connection.
- Remove the Middle Handle: Find the black release button located below the lower power cord wrap. Press this button while pulling the middle handle straight up to detach it from the lower body.
- Reinstall the Middle Handle: Slide the middle handle back down onto the lower body of the Bissell TurboClean PowerBrush Pet. Ensure it is correctly aligned and push down until you hear a click, indicating it is securely locked in place.
- Reinstall the Upper Handle: Slide the upper handle down into the middle handle. Push until you hear a click, confirming it is firmly connected.
Step 3: Trigger Test
After reassembling the handle, test the trigger mechanism to ensure it is functioning correctly. Sometimes, disassembling and reassembling can reseat components that might be slightly misaligned.
Step 4: Clean Water Tank Inspection
Inspect the clean water tank for any cracks, damage, or debris that might be blocking the water flow. Ensure the tank is properly filled with clean water and Bissell cleaning formula as recommended for your TurboClean PowerBrush Pet.
Step 5: Reinstall Clean Water Tank
Carefully reinstall the clean water tank onto the Bissell TurboClean PowerBrush Pet. Ensure it is firmly seated and properly aligned with the machine. You should hear or feel it click into place.
Step 6: Machine Testing
Now, it’s time to test if these steps have resolved the no-spray issue with your Bissell TurboClean PowerBrush Pet.
- Plug in and Power On: Plug the machine back into the power outlet and turn it on.
- Check for Spray: Press down on the trigger while making a few forward and backward cleaning strokes over a test area. Observe if the machine is now spraying water.
Issue Resolved?
If your Bissell TurboClean PowerBrush Pet is now spraying, congratulations! You have successfully resolved the issue. Regular cleaning and maintenance will help keep your machine in optimal working condition.
If these troubleshooting steps have not resolved the lack of spray from your Bissell TurboClean PowerBrush Pet, don’t worry. Bissell’s customer support team is ready to provide further assistance tailored to your specific product and issue.
Get Advanced Help
[Link to Bissell Support]
We are glad to have helped you get back to cleaning with your Bissell TurboClean PowerBrush Pet! For any further assistance or related information, please explore the related articles below or visit support.bissell.com.
Was this answer helpful?
[Helpful/Not Helpful Buttons]
Related Content
